Sodium hypochlorite, sodium hydroxide, gelling agent, mildew inhibitor, surfactant, etc.

Bathroom, kitchen sink, window frames, washing machine seal rings, inside refrigerator, ceramic tile surfaces, and joints where mold and mildew stains may occur due to dampness. Prevents the attachment of mold and mildew.

1. Before use, please ventilate the area by opening windows. Ensure that the treated surface is dry and clean. Open the tube and squeeze out approximately 3mm thickness (do not spread it thinly, as it may affect the effectiveness).

2. Apply evenly to the moldy areas. When cleaning large areas of mold, remove the pointed cap and directly squeeze the tube for application. When cleaning mold in seams such as window frames, toilets, sinks, etc., use the pointed cap for application.

3. After allowing it to sit for 3-5 hours, wipe with a damp cloth or rinse with water.

4. For larger or deeper mold areas, increase the amount used or extend the waiting time.

5. If mold stains are not completely removed, repeat the process. For severe mold, use approximately 3-4 times with a minimum interval of about 3-5 hours each time. (Better results can be achieved by covering with plastic wrap).

1. Before use, wipe the damp and moldy surface dry with a cloth, as a humid environment may affect the gel's effectiveness.

2. It is recommended to wear rubber gloves during use.

3. For those sensitive to odors, it is advisable to wear a mask and ensure proper ventilation.

4. Squeeze the gel completely covering the moldy areas, do not spread it thinly.

5. Keep it out of reach of children. High temperatures, freezing, or direct sunlight can reduce the product's viscosity. After use, cover the lid tightly and store it in a cool, dry place.

6. The mold remover gel cannot penetrate silicone sealant and can only be used on the surface of silicone sealant mold stains. If there is mold inside the sealant, use a tool to remove the sealant completely before applying this product. After removing the mold, reapply the sealant.

7. The mold remover gel is not suitable for use on aluminum products, marble, etc. If the gel turns from a gel to a liquid form, it indicates that the product has expired, and it should not be used further.